HPE Aruba 2530-48G-PoE+ - Central Managed - switch - 48 ports - managed - rack-mountable
Part #:
J9772ACM
Availability:
In Stock
The Aruba 2530 Switch Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver Layer 2 capabilities with enhanced access security, traffic prioritization, sFlow, IPv6 host support, and power savings with energy-efficient Ethernet. The Aruba 2530 Switch Series is easy to use and deploy, and delivers consistent wired / wireless user experience.
Dimensions & Weight
| Width | 17.4 in |
| Depth | 12.7 in |
| Height | 1.8 in |
| Weight | 10.41 lbs |
Manufacturer Warranty
| Service & Support | Limited warranty - lifetime |
Environmental Parameters
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 113 °F |
| Humidity Range Operating | 15 - 95% (non-condensing) |
| Min Storage Temperature | -40 °F |
| Max Storage Temperature | 158 °F |
| Humidity Range Storage | 15 - 90% (non-condensing) |
General
| Device Type | Switch - 48 ports - managed - stackable |
| Enclosure Type | Desktop, rack-mountable, wall-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP |
| Power Over Ethernet (PoE) | PoE+ |
| PoE Budget | 382 W |
| Performance | Throughput (64-byte packet size): up to 77.3 Mpps ¦ Switching capacity: 104 Gbps ¦ Latency (64-byte packets): 2.3 µs |
| Capacity | Jumbo frame size: 9220 |
| MAC Address Table Size | 16000 entries |
| Jumbo Frame Support | 9220 bytes |
| Routing Protocol | IGMPv2, IGMP, MLD |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, SNMP, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, SSH-2, CLI |
| Encryption Algorithm | SSL |
| Authentication Method | RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
| Features | Flow control, DHCP support, BOOTP support, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, port mirroring, DiffServ support, IPv6 support, half duplex mode, full duplex mode, SNTP support, sFlow, Spanning Tree Protocol (STP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Multicast Suppression, Jumbo Frames support, DHCP server, STP Root Guard, LLDP support, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), MAC address lockout, dynamic ARP protection, DHCP protection, Dynamic VLAN Support (GVRP), dual firmware images, Neighbor Discovery Protocol (NDP), Class of Service (CoS), Generic Attribute Registration Protocol (GARP), Type of Service (ToS), Internet Control Message Protocol (ICMP) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az |
| Processor | 1 x ARM: 800 MHz |
| RAM | 256 MB DDR3 SDRAM |
| Flash Memory | 128 MB |
Expansion / Connectivity
| Interfaces | 48 x 1000Base-T RJ-45 PoE+ ¦ 4 x 1000Base-X SFP ¦ 1 x management RJ-45 |
Power
| Power Device | Internal power supply |
| Voltage Required | AC 120 V |
| SKU | J9772ACM |
|---|---|
| Manufacturer | HPE |
Write Your Own Review
-->
