Shopping Cart 0
AED0.00

There are no items matching the selection.

Cisco 887VA router with VDSL2/ADSL2+ over POTS - router - DSL modem - desktop

Part #:
CISCO887VA-K9
Availability:
In Stock
Price:
Excl VAT: AED 1,250.00 Incl VAT: AED 1,312.50
The Cisco 880VA series routers support DSL multi mode, including very high speed DSL 2 and asymmetric DSL 2+ . The routers support VDSL2 and ADSL2+ on a single WAN interface, thus providing secure, cost-effective connectivity to small businesses, enterprise small branch offices, and teleworker sites.
Device TypeRouter - 4-port switch (integrated)
Enclosure TypeDesktop
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet
CapacityIPSec VPN tunnels: 20
Network / Transport ProtocolL2TP, IPSec, PPPoE, PPPoA, DHCP, DNS
Routing ProtocolOSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE
Remote Management ProtocolTelnet, SNMP 3, HTTP, HTTPS, SSH
Encryption AlgorithmDES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Authentication MethodRADIUS, TACACS+
FeaturesFirewall protection, auto-sensing per device, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy
Compliant StandardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
RAM256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
Flash Memory128 MB
Status IndicatorsPort status, power
DIMENSIONS & WEIGHT
Width32.5 cm
Depth24.9 cm
Height4.4 cm
Weight2.5 kg
POWER
Power DeviceExternal power adapter - 60 Watt
Voltage RequiredAC 120/230 V (50/60 Hz)
ENVIRONMENTAL PARAMETERS
Min Operating Temperature0 °C
Max Operating Temperature40 °C
Humidity Range Operating10 - 85%
EXPANSION / CONNECTIVITY
InterfacesLAN: 4 x 10Base-T/100Base-TX - RJ-45
Management: 1 x console - RJ-45
WAN: 1 x ADSL2+
USB: 1 x 4 pin USB Type A
WAN: 1 x VDSL2
Expansion Slots1 (total) / 1 (free) x SO-DIMM 200-pin
SOFTWARE / SYSTEM REQUIREMENTS
OS ProvidedCisco IOS Advanced IP services
COMMUNICATIONS
TypeDSL modem
Digital Signaling ProtocolADSL2, ADSL2+, VDSL2
Protocols & SpecificationsITU G.994.1 (G.hs), ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A
More Information
SKUCISCO887VA-K9
ManufacturerCisco
Write Your Own Review
You're reviewing: Cisco 887VA router with VDSL2/ADSL2+ over POTS - router - DSL modem - desktop
Your Rating
-->
Compare Products
You have no items to compare.